Titanium Springs

G & O Titanium Springs

  • aerospace spring manufacturer
  • aerospace spring manufacturer
  • aerospace spring manufacturer

Do you need to shed some pounds?

The surface integrity of titanium is critical to its performance as a spring, to support this all of the Titanium springs we produce are mandrel coiled. We also recommend that Beta Titanium springs have the alpha case removed post AMS-H-81200 compliant heat treatment by either etching to ASTM B600 or by other mechanical means such as vapour blasting. The ductility of Beta Titanium is significantly reduced without this process. We also recommend that Beta C is shot peened to AMS2430 (with a post peen glass bead decontamination) as this will significantly improve the fatigue life of the spring without compromising relaxation performance (which is a significant issue with other lessor material grades).

Titanium can offer significant weight savings when compared to other materials, however it is useful to remember that where the application is highly stressed an increased wire diameter will be required due to the lower material modulus.

The highest weight savings that can be achieved are normally from extension springs where due to the reduced material strength less active coils will be required to achieve the same performance. Compression spring savings vary from application to application.

We produce springs from Beta C Titanium (AMS4957) which is regarded as being the ‘best’ Ti spring grade. We also produce springs for lower stress applications from other Titanium grades such as Grade 5 (AMS4928).

See if you can save some pounds?

BUILT IN QUALITY | APQP | PPAP | MSA | PFMEA

  • cert_as9100
  • cert_nadcap
  • cert_ads21
  • cert_cyber-essentials
  • cert_disability
  • Joscar Registered
aeroplane on runway
I have been working with G&O since October 2019 and I could never say a bad word about this company. I have always been supported with important and critical items and as a company they are meeting my personal requirements. The business relationship with G&O is strong even during the hard times of the COVID-19 pandemic. G&O is self managing the VMI system each week I am up to date with any part number supplied by them. I would recommend anyone at anytime a collaboration with G&O. Tomasz Grabarek Material Controller - Incora
Chat with G&O